show log counters
ExtremeWare Software 7.3.0 Command Reference Guide 725
The output produced by the above command is similar to the following:
Comp SubComp Condition Severity Rf Notified Occurred
------- ----------- ----------------------- ------------- -- -------- --------
STP InBPDU
PDUDrop Error 1 0 0
PDUIgn Debug-Summary 0 0 0
PDUTrace Info 0 0 0
The following command displays the event counters for the event condition PDUDrop in the component
STP.InBPDU:
show log counters "STP.InBPDU.PDUDrop"
The output produced by the above command is similar to the following:
Comp SubComp Condition Severity Rf Notified Occurred
------- ----------- ----------------------- ------------- -- -------- --------
STP InBPDU
PDUDrop Error 1 0 0
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...