show log events
ExtremeWare Software 7.3.0 Command Reference Guide 727
Comp SubComp Condition Severity Parameters
------- ----------- ----------------------- ------------- ----------
STP InBPDU
PDUDrop Error 3
PDUIgn Debug-Summary 2
PDUTrace Info 2
The following command displays the details of the event condition PDUTrace in the component
STP.InBPDU:
show log events stp.inbpdu.pdutrace detail
The output produced by the above command is similar to the following:
Comp SubComp Condition Severity Parameters
------- ----------- ----------------------- ------------- ----------
STP InBPDU PDUTrace Info 2 Total
0 - string
1 - ports
"Port=%1%: %0%"
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...