show ports stats
ExtremeWare Software 7.3.0 Command Reference Guide 735
• Received Broadcast (RX Bcast)—The total number of frames received by the port that are addressed
to a broadcast address.
• Received Multicast (RX Mcast)—The total number of frames received by the port that are addressed
to a multicast address.
For version 2.0 and 4.0
• Disabled and Not Present are not available as link status indicators.
• Chassis is available as a link status indicator. If chassis is listed, the link is connected to a Summit
Virtual Chassis.
Example
The following command displays port statistics for ports 1 through 3 on a stand-alone switch:
show ports 1-3 stats
The following command displays port statistics for slot 1, ports 1 through 3 on a modular switch:
show ports 1:1-1:3 stats
The following command displays port statistics for all ports:
show ports stats
The output produced by the
show ports stats
command is similar to the following:
Port Statistics Thu Jul 8 09:50:50 2004
Port Link Tx Pkt Tx Byte Rx Pkt Rx Byte Rx Rx
Status Count Count Count Count Bcast Mcast
================================================================================
1:1 A 740131 61671211 201310 17023242 7 3963
1:2 A 292131 24686533 896516 183343391 37 21456
1:3 A 37273 4351318 37578 4721313 36 21551
1:4 R 0 0 0 0 0 0
1:5 R 0 0 0 0 0 0
1:6 A 1099 375858 11962 901306 4421 7541
1:7 R 0 0 0 0 0 0
1:8 A 1099 375858 0 0 0 0
The following command displays cable diagnostics information for all ports:
show ports stats cable-diagnostics
The output produced by the
show ports stats cable-diagnostics
command is similar to the
following:
Port Statistics Thu Jul 8 09:52:19 2004
Port Link Num Diags Diags Diags
Status Diags Success Fail Change
================================================================================
1:1 A 0 0 0 0
1:2 A 1 1 0 0
1:3 A 0 0 0 0
1:4 R 0 0 0 0
1:5 R 10 8 2 0
1:6 A 0 0 0 0
1:7 R 0 0 0 0