780 ExtremeWare Software 7.3.0 Command Reference Guide
Security Commands
Example
The following command configures denial of service protection to be invoked when 3000 or more
packets per second are received by a port on the switch. This command configures logging to occur
when the number of packets per second that the switch receives is 2000, the timeout is 15 seconds, and
messages are on:
configure cpu-dos-protect alert-threshold 3000 notice-threshold 2000 timeout 15
messages on filter-precedence 10
History
This command was first available in ExtremeWare 6.2.2
The filter-type-allowed keyword was added in ExtremeWare 7.0.0.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...