812 ExtremeWare Software 7.3.0 Command Reference Guide
Security Commands
Default
N/A.
Usage Guidelines
None.
Example
The following command deletes the set statement from entry 15 of route table bgp-out that specified
setting a MED value of 200:
configure bgp-out 15 delete set med 200
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
origin [igp | egp | incomplete] Specifies the origin.
tag <tag_number> Specifies the tag in the route to the specified number.
accounting index
<index_number>
Specifies the index number of an accounting index to be set.
value <value_number> Specifies a value for the accounting index.
cost <number> Specifies the cost of the route.
cost-type <number> Specifies the cost type.
To Next Page
Loading...