306 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Configuring Slots and Ports on a Switch
Link Active:
Link Down: 01 02 03 04 05 06 07 08
09 10 11 12
Slot 4 information:
State: Operational
Network Processor 1 : Operational
Network Processor 2 : Operational
General Purpose Proc: Operational
Serial number: 701039-04-0128F07843
HW Module Type: P12ci
Optics: Single-mode Fiber
NP 1: Rev C0
NP 2: Rev C0
Configured Type: Not configured
Bootrom Version: 1.18
Software image booted: secondary
Software image configured: secondary
Primary software version:
7.0.0 (Build 44) (oc12) by Beta_Master on Sat 10/12/2002 06:16p
Secondary software version:
7.0.0 (Build 44) (oc12) by Beta_Master on Sat 10/12/2002 06:16p
POS ports available:
Link Up:
Link Down: 01 02
Slot 5 information:
State: Operational
Serial number: 701026-10-0142F70250
HW Module Type: F48Ti
Configured Type: Not configured
UTP ports available:
Link Active:
Link Down: 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32
33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48
Slot 6 information:
State: Empty
HW Module Type: Empty
Configured Type: Not configured
Slot 7 information:
State: Empty
HW Module Type: Empty