EasyManua.ls Logo

Analog Devices SHARC ADSP-214 Series - Left-Justified Mode; Right-Justified Mode

Analog Devices SHARC ADSP-214 Series
1192 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ADSP-214xx SHARC Processor Hardware Reference C-5
Audio Frame Formats
device. If the transmitter is sending 32 bits per channel to a device with
only 24 bits of internal precision, the receiver ignores the extra bits of pre-
cision by not storing the bits past the 24th bit. Likewise, if the transmitter
is sending 16 bits per channel to a receiving device with 24 bits of preci-
sion, the receiver zero-fills the missing bits. This feature makes it possible
to mix and match components of varying precision without re
configuration.
Left-Justified Mode
Left-justified mode (also known as SONY Format) is a mode where in
each frame sync cycle two samples of data are transmitted/received—one
sample on the high segment of the frame sync, the other on the low seg-
ment of the frame sync. Prior to development of the I
2
S standard, many
manufacturers used a variety of non-standard stereo modes. Some compa-
nies continue to use this mode, which is supported by many of today’s
audio front-end devices.
Programs have control over various attributes of this mode. One attribute
is the number of bits (8- to 32-bit word lengths). However, each sample of
the pair that occurs on each frame sync must be the same length.
Right-Justified Mode
Right-justified mode is a mode where in each frame sync cycle two sam-
ples of data are transmitted/received—one sample on the high segment of
the frame sync, the other on the low segment of the frame sync. Prior to
development of the I
2
S standard, many manufacturers used a variety of
non-standard stereo modes. Some companies continue to use this mode,
which is supported by many of today’s audio front-end devices.
www.BDTIC.com/ADI

Table of Contents

Related product manuals