C613-50631-01 Rev A Command Reference for IE340 Series 1071
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
RIP COMMANDS
UNDEBUG
RIP
undebug rip
Overview Use this command to disable the options set for debugging information of RIP
events, packets and communication between RIP and NSM.
This command has the same effect as the no debug rip command.
Syntax
undebug rip {all|events|nsm|<packet>}
Mode Privileged Exec
Example To disable the options set for debugging RIP information events, use the following
command:
awplus# undebug rip packet
Related
commands
debug rip
Parameter Description
all Disables all RIP debugging.
events Disables the logging of RIP events.
nsm Disables the logging of RIP and NSM communication.
<packet> packet [recv|send] [detail]
Disables the debugging of RIP packets.
recv Disables the logging of received packet information.
send Disables the logging of sent packet information.
detail Disables the logging of sent or received RIP packets.
To Next Page
Loading...
Need help?
General
