Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 3371
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
TRIGGER COMMANDS
SCRIPT
script
Overview This command specifies one or more scripts that are to be run when the trigger
activates. You can add up to five scripts to a single trigger.
The sequence in which the trigger runs the scripts is specified by the number you
set before the name of the script file. One script is executed completely before the
next script begins.
Scripts may be either ASH shell scripts, indicated by a .sh filename extension suffix,
or AlliedWare Plus scripts, indicated by a .scp filename extension suffix. AlliedWare
Plus scripts only need to be readable. You can't use ASH scripts when the device is
in Secure Mode.
The no variant of this command removes one or more scripts from the trigger’s
script list. The scripts are identified by either their name, or by specifying their
position in the script list. The all parameter removes all scripts from the trigger.
Syntax
script <1-5> {<filename>}
no script {<1-5>|<filename>|all}
Mode Trigger Configuration
Examples To configure trigger 71 to run the script flash:/cpu_trig.sh in position 3 when the
trigger activates, use the commands:
awplus# configure terminal
awplus(config)# trigger 71
awplus(config-trigger)# script 3 flash:/cpu_trig.sh
To configure trigger 99 to run the scripts flash:reconfig.scp, flash:cpu_trig.sh and
flash:email.scp in positions 2, 3 and 5 when the trigger activates, use the following
commands:
awplus# configure terminal
awplus(config)# trigger 99
awplus(config-trigger)# script 2 flash:/reconfig.scp 3
flash:/cpu_trig.sh 5 flash:/email.scp
To remove the scripts 1, 3 and 4 from trigger 71’s script list, use the commands:
awplus# configure terminal
awplus(config)# trigger 71
awplus(config-trigger)# no script 1 3 4
Parameter Description
<1-5> The position of the script in execution sequence. The trigger runs the
lowest numbered script first.
<filename> The path to the script file.

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English