Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 2054
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
IPV6 HARDWARE ACCESS CONTROL LIST (ACL) COMMANDS
CLEAR
ACCESS-LIST COUNTERS
clear access-list counters
Overview Use this command to reset the hardware access-list counters to zero. The
access-list counters show the number of packets that match your hardware ACLs.
Every time a hardware ACL allows or drops a packet, its counter increments.
Syntax
clear access-list counters [<acl>]
Mode Privileged Exec
Usage notes To view the counter values, use the command show access-list counters.
Example To clear the counters for the ACL named ACL-1, use the command:
awplus# clear access-list counters ACL-1
Related
commands
show access-list counters
Command
changes
Version 5.5.2-2.1: command added
Parameter Description
<acl> Clear the counters for only the specified ACL. You can enter the
ACL name or number.

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English