C613-50631-01 Rev A Command Reference for IE340 Series 1128
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
OSPF COMMANDS
DEBUG
OSPF PACKET
debug ospf packet
Overview This command enables debugging options for OSPF packets.
To enable all debugging options, specify debug ospf packet with no additional
parameters.
The no and undebug variant of this command disable OSPF packet debugging.
Use this command without parameters to disable all options.
Syntax
debug ospf packet [dd] [detail] [hello] [ls-ack] [ls-request]
[ls-update] [recv] [send]
no debug ospf packet [dd] [detail] [hello] [ls-ack] [ls-request]
[ls-update] [recv] [send]
Mode Privileged Exec and Global Configuration
Examples
awplus# debug ospf packet detail
awplus# debug ospf packet dd send detail
awplus# no debug ospf packet ls-request recv detail
awplus# undebug ospf packet ls-request recv detail
Related
commands
terminal monitor
undebug ospf packet
Parameter Description
dd Specifies debugging for OSPF database descriptions.
detail Sets the debug option to detailed information.
hello Specifies debugging for OSPF hello packets.
ls-ack Specifies debugging for OSPF link state acknowledgments.
ls-request Specifies debugging for OSPF link state requests.
ls-update Specifies debugging for OSPF link state updates.
recv Specifies the debug option set for received packets.
send Specifies the debug option set for sent packets.
To Next Page
Loading...
Need help?
General
