C613-50631-01 Rev A Command Reference for IE340 Series 1835
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
PIM-SM COMMANDS
SHOW
IP PIM SPARSE-MODE MROUTE DETAIL
show ip pim sparse-mode mroute detail
Overview Use this command to display detailed entries of the IP multicast routing table, or
detailed entries of the IP multicast routing table based on the specified address or
addresses.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ip pim sparse-mode mroute [<group-address>] detail
show ip pim sparse-mode mroute [<source-address>] detail
show ip pim sparse-mode mroute [<group-address>
<source-address>] detail
show ip pim sparse-mode mroute [<source-address>
<group-address>] detail
Usage notes Based on the group and source address, the output is the selected route if present
in the multicast route tree.
Mode User Exec and Privileged Exec
Examples The following example commands show detailed entries for IP multicast routing
tables:
awplus# show ip pim sparse-mode mroute detail
awplus# show ip pim sparse-mode mroute 40.40.40.11 detail
awplus# show ip pim sparse-mode mroute 224.1.1.1 detail
awplus# show ip pim sparse-mode mroute 224.1.1.1 40.40.40.11
detail
Parameter Description
<group-address> Group IP address, entered in the form A.B.C.D. Output is all
multicast entries belonging to that group.
<source-address> Source IP address, entered in the form A.B.C.D. Output is all
multicast entries belonging to that source.
detail Show detailed information.
To Next Page
Loading...
Need help?
General
