C613-50631-01 Rev A Command Reference for IE340 Series 1173
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
OSPF COMMANDS
SHOW
DEBUGGING OSPF
show debugging ospf
Overview Use this command to see what debugging is turned on for OSPF.
For information on filtering and saving command output, see the “Getting_Started
with AlliedWare Plus” Feature Overview and Configuration_Guide.
Syntax
show debugging ospf
Mode User Exec and Privileged Exec
Example
awplus# show debugging ospf
Output Figure 28-2: Example output from the show debugging ospf command
OSPF debugging status:
OSPF packet Link State Update debugging is on
OSPF all events debugging is on
To Next Page
Loading...
