Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 916
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
IP ADDRESSING AND PROTOCOL COMMANDS
SHOW
IP IRDP INTERFACE
show ip irdp interface
Overview This command displays the configuration of IRDP on all interfaces, or for a specified
interface.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ip irdp interface [<interface-name>]
Mode User Exec and Privileged Exec
Example To display the IRDP configuration for vlan4, use the command:
awplus# show ip irdp interface vlan4
Output Figure 22-12: Example output from the show ip irdp interface command
Parameter Description
<interface-
name>
Displays the interface status and configuration details of the
specified interface.
vlan13 is up, line protocol is up 
ICMP Router Discovery Protocol 
Sending mode multicast
Router Lifetime 1350 seconds
Default Preference 0
Min Adv Interval 450 seconds
Max Adv Interval 600 seconds 
Next advertisement in 551 seconds 
Non default prefix preferences
192.168.1.1 preference 25000

In packets 0 Out packets 3
In bad packets 0 Out bad packets 0
In good packets 0 Out good packets 3
In ignored packets 0

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English