Allied Telesis IE340 Series - show ipv6 route summary

C613-50631-01 Rev A Command Reference for IE340 Series 998
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
IPV6 COMMANDS
SHOW
IPV6 ROUTE SUMMARY
show ipv6 route summary
Overview Use this command to display the summary of the current NSM RIB entries.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ipv6 route summary
Mode User Exec and Privileged Exec
Example To display IP route summary, use the following command:
awplus# show ipv6 route summary
Output Figure 24-6: Example output from the show ipv6 route summary command
Related
commands
show ip route database
IPv6 routing table name is Default-IPv6-Routing-Table(0)
IPv6 routing table maximum-paths is 4
RouteSource Networks
connected 4
rip 5
Total 9
FIB 5