C613-50631-01 Rev A Command Reference for IE340 Series 2112
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
QOS COMMANDS
CLEAR
MLS QOS INTERFACE QUEUE-COUNTERS
clear mls qos interface queue-counters
Overview Use this command to clear the QoS queue counters for an interface.
Syntax
clear mls qos interface <interface> queue-counters
Mode Privileged Exec
Example To clear the egress queue counters on interface port1.0.1, use the command:
awplus# clear mls qos interface port1.0.1 queue-counters
To clear the egress queue counters on the static aggregator sa1, use the command:
awplus# clear mls qos interface sa1 queue-counters
Related
commands
show mls qos interface queue-counters
Command
changes
Version 5.5.2-2.1: command added
Parameter Description
<interface> The interface to clear the counters for. This can be a switchport, a
static channel group, or a dynamic (LACP) channel group.
To Next Page
Loading...
Need help?
General
