Allied Telesis IE340 Series - clear line console

C613-50631-01 Rev A Command Reference for IE340 Series 204
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
USER ACCESS COMMANDS
CLEAR
LINE CONSOLE
clear line console
Overview This command resets a console line. If a terminal session exists on the line then the
terminal session is terminated. If console line settings have changed then the new
settings are applied.
Syntax
clear line console 0
Mode Privileged Exec
Example To reset the console line (asyn), use the command:
awplus# clear line console 0
% The new settings for console line 0 have been applied
Related
commands
clear line vty
flowcontrol hardware (asyn/console)
line
show users