C613-50631-01 Rev A Command Reference for IE340 Series 225
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
USER ACCESS COMMANDS
SERVICE
ADVANCED-VTY
service advanced-vty
Overview This command enables the advanced-vty help feature. This allows you to use TAB
completion for commands. Where multiple options are possible, the help feature
displays the possible options.
The no service advanced-vty command disables the advanced-vty help feature.
Syntax
service advanced-vty
no service advanced-vty
Default The advanced-vty help feature is enabled by default.
Mode Global Configuration
Examples To disable the advanced-vty help feature, use the command:
awplus# configure terminal
awplus(config)# no service advanced-vty
To re-enable the advanced-vty help feature after it has been disabled, use the
following commands:
awplus# configure terminal
awplus(config)# service advanced-vty
To Next Page
Loading...
Need help?
General
