Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 709
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
SPANNING TREE COMMANDS
SHOW
DEBUGGING MSTP
show debugging mstp
Overview Use this command to see what debugging is turned on for MSTP.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show debugging mstp
Mode User Exec and Privileged Exec
Example To display the MSTP debugging options set, enter the command:
awplus# show debugging mstp
Output Figure 17-1: Example output from show debugging mstp
Related
commands
debug mstp (RSTP and STP)
MSTP debugging status:
MSTP receiving packet debugging is on

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English