C613-50631-01 Rev A Command Reference for IE340 Series 3153
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
NTP COMMANDS
SHOW
NTP COUNTERS ASSOCIATIONS
show ntp counters associations
Overview Use this command to display NTP packet counters for individual servers and peers.
Syntax
show ntp counters associations
Mode Privileged Exec
Examples To display packet counters for each NTP server and peer that is associated with a
device, use the command:
awplus# show ntp counters associations
Output Figure 60-2: Example output from show ntp counters associations
Related
commands
ntp restrict
awplus#show ntp counters associationsď€
Peer 2001::1ď€
sent: -ď€
received: -ď€
Peer 10.37.219.100ď€
sent: 7ď€
received: 7
Table 60-4: Parameters in the output from show ntp counters associations
Parameter Description
Peer An NTP peer or server that the device is associated with.
sent The number of NTP packets that this device sent to the
peer.
received The number of NTP packets that this device received from
the peer.
To Next Page
Loading...
Need help?
General
