Allied Telesis IE340 Series - show debugging ip dns forwarding

C613-50631-01 Rev A Command Reference for IE340 Series 944
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
DOMAIN NAME SERVICE (DNS) COMMANDS
SHOW
DEBUGGING IP DNS FORWARDING
show debugging ip dns forwarding
Overview Use this command to see what debugging is turned on for DNS Relay. DNS Relay
debugging is set using the debug ip dns forwarding command.
For information on filtering and saving command output, see the “Getting_Started
with AlliedWare Plus” Feature Overview and Configuration_Guide.
Syntax
show debugging ip dns forwarding
Mode User Exec and Privileged Exec
Example To display the DNS Relay debugging status, use the command:
awplus# show debugging ip dns forwarding
Output Figure 23-1: Example output from the show debugging ip dns forwarding
command:
Related
commands
debug ip dns forwarding
awplus#show debugging ip dns forwarding

DNS Relay debugging status:
debugging is on