Allied Telesis IE340 Series - show system

C613-50631-01 Rev A Command Reference for IE340 Series 314
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
SYSTEM CONFIGURATION AND MONITORING COMMANDS
SHOW
SYSTEM
show system
Overview This command displays general system information about the device, including
the hardware, memory usage, and software version. It also displays location and
contact details when these have been set.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show system
Mode User Exec and Privileged Exec
Example To display configuration information, use the command:
awplus# show system
Output Figure 7-19: Example output from show system
Related
commands
show system environment
System Status Mon Sep 28 08:42:16 2020

Board ID Bay Board Name Rev Serial number
--------------------------------------------------------------------------------
Base 542 Base IE340-20GP A-0 A10248H190400025
--------------------------------------------------------------------------------
RAM: Total: 466520 kB Free: 330832 kB
Flash: 125.9MB Used: 14.1MB Available: 111.8MB
--------------------------------------------------------------------------------
Environment Status : Normal
Uptime : 0 days 00:08:09
Bootloader version : 6.2.18

Current software : IE340-5.5.0-1.3.rel
Software version : 5.5.0-1.3
Build date : Wed Sep 9 21:10 UTC 2020

Current boot config: flash:/default.cfg (file exists)

System Name
awplus
System Contact