C613-50631-01 Rev A Command Reference for IE340 Series 931
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
DOMAIN NAME SERVICE (DNS) COMMANDS
IP
DNS FORWARDING
ip dns forwarding
Overview Use this command to enable DNS Relay, the forwarding of incoming DNS queries
for IP hostname-to-address translation.
Use the no variant of this command to disable the forwarding of incoming DNS
queries for IP hostname-to-address translation.
Syntax
ip dns forwarding
no ip dns forwarding
Default The forwarding of incoming DNS query packets is disabled by default.
Mode Global Configuration
Usage notes DNS Relay is independent of the configuration of ip domain-lookup (which is
enabled by default). If ip domain-lookup is disabled, but DNS Relay is enabled, the
router will continue to forward DNS queries by hosts in the network to its
configured name-servers.
See the ip dns forwarding dead-time command used with this command.
Examples To enable the forwarding of incoming DNS query packets, use the commands:
awplus# configure terminal
awplus(config)# ip dns forwarding
To disable the forwarding of incoming DNS query packets, use the commands:
awplus# configure terminal
awplus(config)# no ip dns forwarding
Related
commands
clear ip dns forwarding cache
debug ip dns forwarding
ip dns forwarding cache
ip dns forwarding dead-time
ip dns forwarding retry
ip dns forwarding source-interface
ip dns forwarding timeout
ip domain-lookup
ip name-server
show ip dns forwarding
show ip dns forwarding cache
show ip dns forwarding server
To Next Page
Loading...
Need help?
General
