Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 3284
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
MAIL (SMTP) COMMANDS
MAIL
SMTPSERVER TLS
mail smtpserver tls
Overview Use this command to configure the device to send emails over a TLS connection to
the SMTP server instead of sending in clear-text. If the SMTP server does not
support receiving emails over a TLS connection, sending emails from the device
will fail.
Use the no variant of this command to configure the device to send emails over an
unencrypted TCP connection (clear text).
Syntax
mail smtpserver tls [starttls|smtps]
no mail smtpserver tls
Default By default, TLS is disabled and the device sends emails in clear-text.
Mode Global Configuration
Examples To send emails to the SMTP server over a TLS connection that will be established
by the STARTTLS method, use the commands:
awplus# configure terminal
awplus(config)# mail smtpserver tls starttls
To send emails to the SMTP server over a TLS connection from the beginning, use
the commands:
awplus# configure terminal
awplus(config)# mail smtpserver tls smpts
To send emails to the SMTP server in clear text, use the commands:
awplus# configure terminal
awplus(config)# no mail smtpserver tls
Related
commands
mail
show mail
mail smtpserver
mail smtpserver port
mail smtpserver authentication
Command
changes
Version 5.5.3-0.1: command added
Parameter Description
starttls The connection starts as clear-text SMTP first and then the client
establishes a TLS connection using the STARTTLS extension.
smtps Use a TLS connection from the start.

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English