67
C613-50631-01 Rev A Command Reference for IE340 Series 3363
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Trigger Commands
Introduction
Overview This chapter provides an alphabetical reference for commands used to configure
Triggers. For more information, see the Triggers Feature Overview and
Configuration Guide.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Command List •“active (trigger)” on page 3365
•“day” on page 3366
•“debug trigger” on page 3368
•“description (trigger)” on page 3369
•“repeat” on page 3370
•“script” on page 3371
•“show debugging trigger” on page 3373
•“show running-config trigger” on page 3374
•“show trigger” on page 3375
•“test” on page 3380
•“time (trigger)” on page 3381
•“trap” on page 3383
•“trigger” on page 3384
•“trigger activate” on page 3385
•“type atmf guest” on page 3386
•“type atmf node” on page 3387
•“type cpu” on page 3389
•“type env-sensor” on page 3390
To Next Page
Loading...
Need help?
General
