C613-50631-01 Rev A Command Reference for IE340 Series 415
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
LOGGING COMMANDS
DEFAULT
LOG HOST
default log host
Overview This command restores the default settings for log sent to a remote syslog server.
By default no filters are defined for remote syslog servers. Filters must be defined
before messages will be sent. This command also restores the remote syslog server
time offset value to local (no offset).
Syntax
default log host <ip-addr>
Mode Global Configuration
Example To restore the default settings for messages sent to the remote syslog server with
IP address 10.32.16.21 use the following commands:
awplus# configure terminal
awplus(config)# default log host 10.32.16.21
Related
commands
log host
log host (filter)
log host exclude
log host source
log host time
show log config
Parameter Description
<ip-addr> The IP address of a remote syslog server
To Next Page
Loading...
Need help?
General
