Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 2734
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
G.8032 ETHERNET RING PROTECTION SWITCHING COMMANDS
SHOW
G8032 PHYSICAL-RING
show g8032 physical-ring
Overview Use this command to show the G.8032 physical ring instance information.
Syntax
show g8032 physical-ring {<physical-ring-name>|all}
Mode User Exec and Privileged Exec
Example To show the details of a physical ring instance named “red”, use the following
command:
awplus# show g8032 physical-ring red
Output Figure 55-5: Example output from the show g8032 physical-ring command.
Related
commands
g8032 physical-ring
Command
changes
Version 5.4.7-0.1: command added
Parameter Description
<physical-ring-name> The name of the physical ring
all This shows all physical ring instances that have been
configured
awplus#show g8032 physical-ring red
Ring : red
====================
East : port1.0.4
West : port1.0.8
ERP Inst : blue
Table 3: Parameters in the output from the show g8032 physical-ring
command.
Parameter Description
Ring The name of the physical ring that was configured for this
physical ring instance.
East, West,
Terminating
The physical interface port or LAG of the East or West Ring
interface, or the Terminating interface that was configured
for this physical ring instance.
ERP Inst A comma-separated list of ERP instances by name that
have been configured to use this physical ring instance, or
"-" if none.

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English