C613-50631-01 Rev A Command Reference for IE340 Series 1273
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
OSPFV3 FOR IPV6 COMMANDS
SHOW
IPV6 OSPF DATABASE
show ipv6 ospf database
Overview Use this command in User Exec or Privileged Exec modes to display a database
summary for IPv6 OSPF information. Include the process ID parameter with this
command to display information about specified processes.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ipv6 ospf <process-id> database
[self-originate|max-age|adv router <adv-router-id>]
Mode User Exec and Privileged Exec
Example To display the database summary for IPv6 OSPF information on process P10, use
the command:
awplus# show ipv6 ospf P10 database
Output Figure 29-3: Example output from the show ipv6 ospf P10 database command
Parameter Description
<process-id> <0-65535>
The ID of the router process for which information will be
displayed.
self-originate Displays self-originated link states.
max-age Displays LSAs in MaxAge list. It maintains the list of the all LSAs
in the database which have reached the max-age which is
3600 seconds.
adv-router Advertising Router LSA.
<adv-router-id> The Advertising Router ID
(usually entered in IPv4 address format A.B.C.D).
Note that this ID component no longer represents an address;
it is simply a character string that has an IPv4 address format.
To Next Page
Loading...
Need help?
General
