C613-50631-01 Rev A Command Reference for IE340 Series 2482
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
LOCAL RADIUS SERVER COMMANDS
EGRESS
-VLAN-NAME (RADSRV-GRP)
egress-vlan-name (radsrv-grp)
Overview Use this command to configure the standard RADIUS attribute
‘Egress-VLAN-Name (58)’ for the local RADIUS server user group.
Use the no variant of this command to remove the Egress-VLAN-Name attribute
from the local RADIUS server user group.
Syntax
egress-vlan-name <vlan-name> [tagged|untagged]
no egress-vlan-name
Default By default, no Egress-VLAN-Name attributes are configured.
Mode Local RADIUS Server User Group Configuration
Usage When a Voice VLAN is configured for dynamic VLAN allocation (switchport voice
vlan command), the RADIUS server must be configured to send the VLAN
information when an IP phone is successfully authenticated. Use either the
egress-vlan-id (radsrv-grp) command or the egress-vlan-name (radsrv-grp)
command, and specify the tagged parameter.
Examples To configure the ‘Egress-VLAN-Name’ attribute for the RADIUS server user group
‘NormalUsers’ with the VLAN name vlan2 and all frames on this VLAN tagged, use
the commands:
awplus# configure terminal
awplus(config)# radius-server local
awplus(config-radsrv)# group NormalUsers
awplus(config-radsrv-group)# egress-vlan-name vlan2 tagged
To delete the ‘Egress-VLAN-Name’ attribute for the ‘NormalUsers’ group, use the
commands:
awplus# configure terminal
awplus(config)# radius-server local
awplus(config-radsrv)# group NormalUsers
awplus(config-radsrv-group)# no egress-vlan-name
Parameter Description
<vlan-name> The VLAN name to be configured as the Egress-VLAN-Name
attribute.
tagged Set frames on the VLAN as tagged. This sets the tag indication field
to indicate that all frames on this VLAN are tagged.
untagged Set all frames on the VLAN as untagged. This sets the tag indication
field to indicate that all frames on this VLAN are untagged.
To Next Page
Loading...
Need help?
General
