C613-50631-01 Rev A Command Reference for IE340 Series 1593
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
BGP AND BGP4+ COMMANDS
SHOW
IP PREFIX-LIST
show ip prefix-list
Overview Use this command to display the IPv4 prefix-list entries.
Note that this command is valid for RIP and BGP routing protocols only.
Syntax
show ip prefix-list [<name>|detail|summary]
Mode User Exec and Privileged Exec
Example
awplus# show ip prefix-list
awplus# show ip prefix-list 10.10.0.98/8
awplus# show ip prefix-list detail
Related
commands
ip prefix-list
Parameter Description
<name> Specify the name of a prefix list in this placeholder.
detail Specify this parameter to show detailed output for all IPv4 prefix lists.
summary Specify this parameter to show summary output for all IPv4 prefix lists.
To Next Page
Loading...
Need help?
General
