C613-50631-01 Rev A Command Reference for IE340 Series 2560
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
DHCP SNOOPING COMMANDS
DEBUG
IP DHCP SNOOPING
debug ip dhcp snooping
Overview Use this command to enable the specified types of debugging for DHCP snooping.
Use the no variant of this command to disable the specified types of debugging.
Syntax
debug ip dhcp snooping {all|acl|db|packet [detail]}
no debug ip dhcp snooping {all|acl|db|packet [detail]}
Default Disabled
Mode Privileged Exec
Example To enable access list debugging for DHCP snooping, use the commands:
awplus# debug ip dhcp snooping acl
Related
commands
debug arp security
show debugging ip dhcp snooping
show log
terminal monitor
Parameter Description
all All DHCP snooping debug.
acl DHCP snooping access list debug.
db DHCP snooping binding database debug.
packet DHCP snooping packet debug. For the no variant of this command,
this option also disables detailed packet debug, if it was enabled.
detail Detailed packet debug.
To Next Page
Loading...
Need help?
General
