Allied Telesis IE340 Series - show ipv6 access-list (IPv6 Hardware ACLs)

C613-50631-01 Rev A Command Reference for IE340 Series 2082
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
IPV6 HARDWARE ACCESS CONTROL LIST (ACL) COMMANDS
SHOW
IPV6 ACCESS-LIST (IPV6 HARDWARE ACLS)
show ipv6 access-list (IPv6 Hardware ACLs)
Overview Use this command to display all configured hardware IPv6 access-lists or the IPv6
access-list specified by name. Omitting the optional name parameter will display
all IPv6 ACLs.
Syntax
show ipv6 access-list [<name>]
Mode User Exec and Privileged Exec
Example To show all configured IPv6 access-lists use the command:
awplus# show ipv6 access-list
Output Figure 40-4: Example output from the show ipv6 access-list command
Related
commands
ipv6 access-list (named IPv6 hardware ACL)
(named IPv6 hardware ACL: ICMP entry)
(named IPv6 hardware ACL: IPv6 packet entry)
(named IPv6 hardware ACL: IP protocol entry)
(named IPv6 hardware ACL: TCP or UDP entry)
ipv6 traffic-filter
Parameter Description
<name> Hardware IPv6 access-list name.
IPv6 access-list deny_ssh
deny tcp abcd::0/64 any eq 22