Allied Telesis IE340 Series - show debugging atmf

C613-50631-01 Rev A Command Reference for IE340 Series 3017
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AMF AND AMF PLUS COMMANDS
SHOW
DEBUGGING ATMF
show debugging atmf
Overview Use this command to see what debugging is turned on for AMF.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show debugging atmf
Mode Privileged Exec
Example To display the AMF debugging status, use the command:
node_1# show debugging atmf
Related
commands
debug atmf packet
Table 57-1: Sample output from the show debugging atmf command.
node_1# show debugging atmf
ATMF debugging status:
ATMF arealink debugging is on
ATMF link debugging is on
ATMF crosslink debugging is on
ATMF database debugging is on
ATMF neighbor debugging is on
ATMF packet debugging is on
ATMF error debugging is on