C613-50631-01 Rev A Command Reference for IE340 Series 2747
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
MEDIA REDUNDANCY PROTOCOL (MRP) COMMANDS
DEBUG
MRP
debug mrp
Overview Use this command to enable debug output for MRP.
Use the no variant of this command to disable debug output.
Syntax
debug mrp {all|fdb|fsm|port}
no debug mrp {all|fdb|fsm|port}
Default All MRP debug output is disabled.
Mode User Exec
Usage notes Note that enabling MRP debug is not saved to the config, so enabling debug
output will not be persistent.
Example To enable all MRP debug output, use the command:
awplus# debug mrp all
To disable MRP port event debug output, use the command:
awplus# no debug mrp port
Related
commands
mrp ring
show debugging mrp
Command
changes
Version 5.5.0-2.1: command added
Parameter Description
all Enable all debug output options for MRP.
fdb Enable debug output for MRP forwarding database events.
fsm Enable debug output for MRP state machine events.
port Enable debug output for MRP port events.
To Next Page
Loading...
Need help?
General
