C613-50631-01 Rev A Command Reference for IE340 Series 3159
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
PRECISION TIME PROTOCOL (PTP) AND TRANSPARENT CLOCK COMMANDS
PTP
GLOBAL
ptp global
Overview Use this command to enable 1588v2 based timing support on the device.
Use the no variant of this command to disable the timing support.
Syntax
ptp global
no ptp global
Default Disabled
Mode Global Configuration
Example To enable 1588v2 timing support on the switch, use the commands:
awplus# configure terminal
awplus(config)# ptp global
To disable 1588v2 timing support on the switch, use the commands:
awplus# configure terminal
awplus(config)# no ptp global
Related
commands
clock-port
ptp-clk
show ptp data transparent
show ptp port
Command
changes
Version 5.4.7-0.1: command added
Version 5.4.8-0.2: added to x230, x550 series products
To Next Page
Loading...
Need help?
General
