C613-50631-01 Rev A Command Reference for IE340 Series 2851
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AMF AND AMF PLUS COMMANDS
ATMF
RECOVER GUEST
atmf recover guest
Overview Use this command to initiate a guest node recovery or replacement by reloading
its backup file-set that is located within the AMF backup system. Note that this
command must be run on the edge node device that connects to the guest node.
Syntax
atmf recover guest [<guest-port>]
Mode User Exec/Privileged Exec
Example To recover a guest on node1 port1.0.1, use the following command
node1# atmf recover guest port1.0.1
Related
commands
show atmf backup guest
Parameter Description
<guest-port> The port number that connects to the guest node.
To Next Page
Loading...
Need help?
General
