C613-50631-01 Rev A Command Reference for IE340 Series 3167
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
SNMP COMMANDS
MAC
ADDRESS-TABLE NOTIFICATION MAC-CHANGE
mac address-table notification mac-change
Overview Use this command to enable the mac-change history table. You also need to use
the command snmp trap mac-change to set up the trap and snmp-server enable
trap to enable the trap for transmission.
Use the no variant of this command to disable the mac-change history table.
Syntax
mac address-table notification mac-change
no mac address-table notification mac-change
Default Disabled
Mode Global Configuration
Usage notes To set up the mac-change trap use the command:
• snmp trap mac-change
To enable transmission of the mac-change trap, specify the parameter
mac-change, use the command:
• snmp-server enable trap
Example To enable the mac-change history table, use the commands:
awplus# configure terminal
awplus(config)# mac address-table notification mac-change
Related
commands
clear mac address-table notification mac-change
mac address-table notification mac-change history-size
mac address-table notification mac-change interval
mac address-table notification mac-threshold
show mac address-table notification mac-change
snmp-server enable trap
snmp trap mac-change
Command
changes
Version 5.5.1-2.1: command added
To Next Page
Loading...
Need help?
General
