Allied Telesis IE340 Series - show auth-web-server

C613-50631-01 Rev A Command Reference for IE340 Series 2338
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AUTHENTICATION COMMANDS
SHOW
AUTH-WEB-SERVER
show auth-web-server
Overview This command shows the Web-Authentication server configuration and status on
the switch.
Syntax
show auth-web-server
Mode Privileged Exec
Example To display Web-Authentication server configuration and status, enter the
command:
awplus# show auth-web-server
Output Figure 44-9: Example output from the show auth-web-server command
Related
commands
auth-web-server ipaddress
auth-web-server port
auth-web-server redirect-delay-time
auth-web-server redirect-url
auth-web-server session-keep
auth-web-server ssl
Web authentication server
Server status: enabled
Server mode: none
Server address: 192...
DHCP server enabled
DHCP lease time: 20
DHCP WPAD Option URL: http://...
HTTP Port No: 80
Security: disabled
Certification: default
SSL Port No: 443
Redirect URL: --
Redirect Delay Time: 5
HTTP Redirect: enabled
Session keep: disabled
PingPolling: disabled
PingPollingType: Ping
PingInterval: 30
Timeout: 1
FailCount: 5
ReauthTimerReFresh: disabled