Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 233
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
USER ACCESS COMMANDS
SHOW
TELNET
show telnet
Overview This command shows the Telnet server settings.
Syntax
show telnet
Mode User Exec and Privileged Exec
Example To show the Telnet server settings, use the command:
awplus# show telnet
Output Figure 4-5: Example output from the show telnet command
Related
commands
clear line vty
service telnet
show users
telnet server
Telnet Server Configuration
------------------------------------------------------------
Telnet server : Enabled
Protocol : IPv4,IPv6
Port : 23

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English