Allied Telesis IE340 Series - show memory history

C613-50631-01 Rev A Command Reference for IE340 Series 306
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
SYSTEM CONFIGURATION AND MONITORING COMMANDS
SHOW
MEMORY HISTORY
show memory history
Overview This command prints a graph showing the historical memory usage.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show memory history
Mode User Exec and Privileged Exec
Usage notes This command’s output displays three graphs of the percentage memory
utilization:
• per second for the last minute, then
• per minute for the last hour, then
• per 30 minutes for the last 30 hours.
Examples To show a graph displaying the historical memory usage, use the command:
awplus# show memory history
Output Figure 7-12: Example output from the show memory history command
Related
commands
show memory allocations
show memory pools
show memory shared
show tech-support
Per minute memory utilization history

100
90
80
70
60
50
40*************************************************************
30
20
10
|....|....|....|....|....|....|....|....|....|....|....|....
Oldest Newest
Memory utilization% per minute (last 60 minutes)
* = average memory utilisation%.
...