Allied Telesis IE340 Series - clear scada modbus tcp server statistics

C613-50631-01 Rev A Command Reference for IE340 Series 3465
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
MODBUS COMMANDS
CLEAR
SCADA MODBUS TCP SERVER STATISTICS
clear scada modbus tcp server statistics
Overview Use this command to reset the MODBUS TCP server statistics.
Syntax
clear scada modbus tcp server statistics
Mode Privileged Exec
Example To clear the MODBUS TCP server statistics, use the following commands:
awplus# configure terminal
awplus(config)# clear scada modbus tcp server statistics
Related
commands
scada modbus tcp server port
scada modbus tcp server
scada modbus tcp server connection
scada modbus tcp server access
clear scada modbus tcp server connection
show scada modbus tcp server
show scada modbus tcp server connections
Command
changes
Version 5.4.8-2.1: command added
Version 5.4.9-0.1: MODBUS support added for x930, x950 series
Version 5.5.0-1.1: MODBUS support added for IE510 series