C613-50631-01 Rev A Command Reference for IE340 Series 184
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
FILE AND CONFIGURATION MANAGEMENT COMMANDS
SHOW
RUNNING-CONFIG
show running-config
Overview This command displays the current configuration of your device. Its output
includes all non-default configuration. The default settings are not displayed.
NOTE: You can control the output by entering | or > at the end of the command:
• To display only lines that contain a particular word, enter:
| include <word>
• To start the display at the first line that contains a particular word, enter:
| begin <word>
• To save the output to a file, enter:
> <filename>
Syntax show running-config [full|<feature>]
Parameter Description
full Display the running-config for all features. This is the default setting, so
it is the same as entering show running-config.
<feature> Display only the configuration for a single feature. The features
available depend on your device and will be some of the following list:
access-list ACL configuration
antivirus Antivirus configuration
application Application configuration
as-path Autonomous system path filter
configuration
as-path access-list Configuration of ACLs for AS path filtering
atmf Allied Telesis Management Framework
configuration
bgp Border Gateway Protocol (BGP)
configuration
community-list Community-list configuration
crypto Security-specific configuration
dhcp DHCP configuration
dpi Deep Packet Inspection configuration
entity Entity configuration
firewall Firewall configuration
interface Interface configuration. See show
running-config interface for further
options.
To Next Page
Loading...
Need help?
General
