Allied Telesis IE340 Series - show ip bgp longer-prefixes (BGP only)

C613-50631-01 Rev A Command Reference for IE340 Series 1569
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
BGP AND BGP4+ COMMANDS
SHOW
IP BGP LONGER-PREFIXES (BGP ONLY)
show ip bgp longer-prefixes (BGP only)
Overview Use this command to display the route of the local BGP routing table for a specific
prefix with a specific mask, or for any prefix having a longer mask than the one
specified.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ip bgp <ip-address/m> longer-prefixes
Mode User Exec and Privileged Exec
Example
awplus# show ip bgp 10.10.0.10/24 longer-prefixes
Command
changes
Added to AlliedWare Plus prior to 5.4.6-1
Version 5.4.6-2.1: VRF-lite support added to BGP for AR-series products
Version 5.4.7-2.1: BGP support added for x510 and x550 series
Version 5.4.7-2.4: BGP support added for IE300 series
Parameter Description
<ip-address/m> Neighbor’s IP address and subnet mask, entered in the form
A.B.C.D/M, where M is the subnet mask length.