47
C613-50631-01 Rev A Command Reference for IE340 Series 2427
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
RADIUS Commands
Introduction
Overview This chapter provides an alphabetical reference for commands used to configure
the device to use RADIUS servers. For more information, see the RADIUS Feature
Overview and Configuration Guide.
Command List •“auth radius send nas-identifier” on page 2428
•“auth radius send service-type” on page 2429
•“clear radius dynamic-authorization counters” on page 2430
•“deadtime (RADIUS server group)” on page 2431
•“debug radius” on page 2432
•“ip radius source-interface” on page 2433
•“radius dynamic-authorization-client” on page 2434
•“radius-server deadtime” on page 2436
•“radius-server host” on page 2437
•“radius-server key” on page 2441
•“radius-server retransmit” on page 2443
•“radius-server timeout” on page 2445
•“server (RADIUS server group)” on page 2447
•“show debugging radius” on page 2449
•“show radius” on page 2450
•“show radius dynamic-authorization counters” on page 2453
•“show radius statistics” on page 2455
•“undebug radius” on page 2456
To Next Page
Loading...
Need help?
General
