Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 251
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
SUBSCRIPTION LICENSING COMMANDS
LICENSE
UPDATE ONLINE
license update online
Overview Use this command to add or update subscription licenses from the Allied Telesis
Download Center, to subscribe to features such as AMF master and OpenFlow.
When you enter this command, the device will:
1) Connect to the Download Center
2) Check if new or changed licenses are available for the device, keyed to the
device’s serial number
3) For each such license it finds, download and install the license.
Syntax
license update online
Default AlliedWare Plus devices do not automatically connect to the Download Center and
check whether licenses are available. They only check when you run the license
update online command.
Mode User Exec/Privileged Exec
Usage notes Verifying the update
The update process normally takes approximately 5 seconds.
If the console does not respond for 10 or more seconds after typing the command,
a network, routing or firewall configuration error is probably preventing the
connection from establishing. If this happens, you can abort the command by
pressing Ctrl-C, or wait for the command to time out after 30 seconds.
If the connection to the Download Centers fails and times out, an error message
will be generated on the CLI to indicate the problem. If you abort the command,
no error message is displayed.
If the update is successful, the device will produce log messages to say which
features have had their licensing state updated (activated, deactivated, number of
items changed, or expiry date changed). If the command completes successfully
but there are no licenses available for the device, or no change in the licenses
already on the device, no log messages will be produced.
You should also use the show license external command to confirm which licenses
are active on the device after the update has been applied.
Example To add a subscription license, use the command:
awplus# license update online
Related
commands
show license external
Command
changes
Version 5.4.6-2.1: command added

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English