Allied Telesis IE340 Series - help radius-attribute

C613-50631-01 Rev A Command Reference for IE340 Series 2486
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
LOCAL RADIUS SERVER COMMANDS
HELP
RADIUS-ATTRIBUTE
help radius-attribute
Overview Use this command to display a list of standard and vendor specific valid RADIUS
attributes that are supported by the local RADIUS server.
Syntax
help radius-attribute [<attribute-name>|<attribute-ID>]
Mode Privileged Exec
Usage notes When used without a parameter, this command lists all of the available RADIUS
attributes.
When used with an attribute name or ID, this command displays the attribute
name, value type, and any predefined values.
Example To list all available RADIUS attributes, use the following command:
awplus# help radius-attribute
To display the details for the RADIUS attribute Frag-Status, use the following
command:
awplus# help radius-attribute frag-status
Parameter Description
<attribute-name> List the details and predefined values for the named
attribute.
<attribute-ID> List the details and predefined values for the given attribute
ID.
awplus#help radius-attribute
Standard Attributes:
1 User-Name
2 User-Password
3 CHAP-Password
4 NAS-IP-Address
5 NAS-Port
6 Service-Type
...
awplus#help radius-attribute frag-status
Frag-Status : integer (Integer number)

Pre-defined values :
Fragmentation-Supported (1)
More-Data-Pending (2)
More-Data-Request (3)
Reserved (0)