C613-50631-01 Rev A Command Reference for IE340 Series 3103
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
DYNAMIC HOST CONFIGURATION PROTOCOL (DHCP) COMMANDS
SHOW
IP DHCP SERVER STATISTICS
show ip dhcp server statistics
Overview This command shows statistics related to the DHCP server.
You can display the server counters using the show counter dhcp-server command
as well as with this command.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ip dhcp server statistics
Mode User Exec and Privileged Exec
Example To display the server statistics, use the command:
awplus# show ip dhcp server statistics
Output Figure 58-15: Example output from the show ip dhcp server statistics
command
DHCP server counters
DHCPDISCOVER in ......... 20
DHCPREQUEST in ......... 12
DHCPDECLINE in ......... 1
DHCPRELEASE in ......... 0
DHCPINFORM in ......... 0
DHCPOFFER out ......... 8
DHCPACK out ......... 4
DHCPNAK out ......... 0
BOOTREQUEST in ......... 0
BOOTREPLY out ......... 0
DHCPLEASEQUERY in ....... 0
DHCPLEASEUNKNOWN out ....... 0
DHCPLEASEACTIVE out ....... 0
DHCPLEASEUNASSIGNED out ....... 0
Parameter Description
DHCPDISCOVER in The number of Discover messages received by the
DHCP server.
DHCPREQUEST in The number of Request messages received by the
DHCP server.
DHCPDECLINE in The number of Decline messages received by the
DHCP server.
DHCPRELEASE in The number of Release messages received by the
DHCP server.
To Next Page
Loading...
