C613-50631-01 Rev A Command Reference for IE340 Series 557
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
ALARM MONITORING COMMANDS
SHOW
DEBUGGING ALARM
show debugging alarm
Overview Use this command to see what debugging is turned on for Alarm Monitoring.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show debugging alarm
Mode User Exec and Privileged Exec
Example To show the status of Alarm Monitoring debugging, use the command:
awplus# show debugging alarm
Output Figure 14-3: Example output from show debugging alarm
Related
commands
debug alarm
awplus#show debugging alarmď€
ď€
% Alarm debugging is disabled
To Next Page
Loading...
Need help?
General
