Allied Telesis IE340 Series - show startup-config

C613-50631-01 Rev A Command Reference for IE340 Series 190
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
FILE AND CONFIGURATION MANAGEMENT COMMANDS
SHOW
STARTUP-CONFIG
show startup-config
Overview This command displays the contents of the start-up configuration file, which is the
file that the device runs on start-up.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show startup-config
Mode Privileged Exec
Example To display the contents of the current start-up configuration file, use the
command:
awplus# show startup-config
Output Figure 3-13: Example output from the show startup-config command
Related
commands
boot config-file backup
copy running-config
copy startup-config
erase startup-config
show boot
awplus#show startup-config
!
service password-encryption
!
no banner motd
!
username manager privilege 15 password 8 $1$bJoVec4D$JwOJGPr7YqoExA0GVasdE0
!
service ssh
!
no service telnet
!
service http
!
no clock timezone

...

line con 0
line vty 0 4
!
end