C613-50631-01 Rev A Command Reference for IE340 Series 912
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
IP ADDRESSING AND PROTOCOL COMMANDS
SHOW
IP FLOODING-NEXTHOPS
show ip flooding-nexthops
Overview Use this command to display the static and dynamic ARP entries in the ARP cache
that flood packets to multiple ports.
Syntax
show ip flooding-nexthops
Mode User Exec and Privileged Exec
Example To display all of the flooding nexthop entries in the ARP cache, use the command:
awplus# show ip flooding-nexthops
Output Figure 22-6: Example output from show ip flooding-nexthops
Related
commands
show arp
Command
changes
Version 5.4.8-2.1: command added
awplus#show ip flooding-nexthops
IP Address MAC Address Interface Flooding Mode Type
11.11.11.10 0300.0000.0011 vlan1 port-group static
To Next Page
Loading...
